EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller is usually a very successful photo voltaic controller designed for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it guarantees optimized Strength conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Important Capabilities with the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for excellent photo voltaic Strength harvesting. Critical capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery life.
LCD Show with real-time data monitoring.
Multiple Load Manage Modes which includes guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Move Guide to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Preparing the Controller
Make sure all components are integrated: Tracer AN unit, temperature sensor, conversation cables, and consumer guide.
Verify the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Choose a nicely-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the offered mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Often stick to correct safety protocols and make sure the process is driven off just before connecting factors.
Move one: Connect the battery terminals towards the charge controller (favourable to beneficial, adverse to adverse).
Stage 2: Join the solar panel array towards the PV enter terminals.
Action 3: Connect the load terminals if employing a immediate load connection.
Move four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity about the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the configurations menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light control.
five. Monitoring and Information Logging
The Tracer AN Series supports real-time checking using Click Here the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port making use of software which include Solar Station PC.
Distant checking is possible with the EPEVER WiFi module.
six. Troubleshooting Prevalent Problems
Situation 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if required.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technologies makes sure:
Larger Efficiency: Diminished energy losses for the duration of conversion.
Enhanced Dependability: Stable general performance below variable hundreds.
Extended Battery Life: Steady and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Extraordinary option for optimizing solar power technology and extending battery daily life. By next the above set up guideline, customers can assure maximum effectiveness and process longevity.